Waste OilRefinery Plant or WORPprocesses used oil and restores its qualities so that it is fit for use ordeemed as good as new. Before going into the details of waste oilrefinery plant, it is made clear that waste oil is distinct from used oil.While used oil refers to the oil which is used more than one time earlier, waste oil refers to contaminated oil.
The quality of transformer oil is crucial for the longevityof the transformer and such quality deteriorates with the course of time. Transformeroil is subjected to numerous physical and chemical processes and becomes degraded over course of time. This has a negative impact on the performance and life span of the oil.
Contamination, overheating, electrical stress and oxidationresults in degrading the quality of oil. Waste oilrefinery plant extracts tiny moisture droplets and water settled in thebottom of the transformer through filtering or centrifugal treatment.
Reactivation Clay Polishing System (RCPS) is employed as anaffordable and cost effective alternative to hydrogen treatment in waste oilrecycling. Such waste oilrefinery plant which uses RCPS technology distillates colour, sulfurcontent and odour of oil and restores its original qualities. Adsorption processremoves chemicals from the oil, while recycling of oil is conducted.
The waste oilrefinery plant executes RCPS to mitigate 2000 PPM of sulfur to lesser than300 PPM in a single pass. The waste oilrecycling process uses modified clay exclusively meant for the purpose,which goes through hundreds of cycles before being replaced. Thus, clay whichassists the waste oil refinery plant is disposed only after six months as dry non hazardous waste.
The Waste oilrecycling activity slashes costs and minimizes environmental hazards duringthe waste oil recycling process and is more beneficial than bleaching earthtreatments. However, RCPS suits small and medium capacity waste oilrecycling plants. The clay can be reused up to 500 times before beingreplaced. Waste oil is recycled in capacities of 50 liters per hour to 10,000 liters per hour.
While RCPS is used in the back end of treatments, noncracking evaporator is used in the front end. A very thin layer of oil iscoated on the wall of the vessels which is subjected to high vacuum. The condensation that follows distinct particles based on molecular weight which is finally polished by reactivated clay which delivers odour free and stable product.
RCPS waste oilrecycling has numerous benefits from various perspectives. Besides lowcosts and flexible operations, they accommodate dual gas scrubber in front endand minimize emission. Low oil losses are converted as feedstock in front end of refinery. The waste if any, is finally standard industrial waste which mitigates any harm to environment.
Please visit our website :
http://www.hering-vpt.com/products/waste-oil-recycling-plant/
